Filter
Top Products
E-9
Airing Your Room
If the atmosphere in your room is stale, you can air it using the Fan
feature
and if necessary, evacuate the stale air outside.
1 If you wish to evacuate stale air outside, push the ventilation lever on the
front of the unit to the right and the open position (
).
Result: The air inside the room circulates and stale air is evacuated
outside
.
Otherwise, push the ventilation lever to the left and the closed
position (
).
Result: The air simply circulates inside the room.
2
If necessary, press the
(On/Off) button.
Result:
The air conditioner starts up in the Cool mode.
The unit beeps twice.
3 If the FAN indicator is not lit up on the unit:
Press the button on the remote control
or
Press the
button on the unit one or more times until the FAN
indicator lights u
p
Result:
The unit beeps each time you press the
/ button.
The air conditioner starts up in Fan mode.
You can change modes at any time
.
When the air conditioner is in the Fan mode, the temperature is not dis
played; in this case, you do not need to set the temperature
.
4 To set the fan speed to... Then...
Press the , or button on the remote control as desired.
or
Press the button on the unit one or more times until the
desired fen speed(
F1, F2, or F3) is displayed.
: Low Speed
: Med Speed
: High speed
5 To control the direction of the air flow, refer to page 11.
Remote Control Control Panel
DB98-26004A.indd 9 2006-12-5 16:37:28