Filter
Top Products
◆ Always have an assistant to help you. Never attempt to install
any air conditioner alone.
◆ You risk the possibility of hurting yourself or injuring others by
attempting to install it alone.
Preparation for Installation
1 Carefully remove the unit from the packing case and lay it on
the floor and check that all accessories (as indicated) are enclosed.
2 Check the cabinet and front grille of the unit for any defects such as
scratches.
3 Be sure to check the power supply.
◆ Refer to the specifications on the label attached to the unit.
Checkpoints Prior to Installation
Installation Conditions
G ETTING STARTED
Electrical Requirements
For personal safety:
◆ This appliance must be properly grounded.
◆ Do not, under any circumstances, cut or remove the third grounding
prong from the power cord.
◆ We recommend that you do not use an extension cord or an
adapter plug with this appliance.
◆ Do not change the plug on the power cord of this appliance.
◆ Follow national electrical codes or local codes and ordinances.
1
◆ If the electric supply provided does not meet the above
specifications, call a licensed electrician.
◆ Aluminum house wiring may pose special problems -
consult a qualified electrician.
◆ This unit requires a separate circuit, serving only this appliance.
115V
15 AMP circuit
"parallel" type
230-208V
20 AMP circuit
"perpendicular" type
230-208V
15 AMP circuit
"tandem" type
230-208V
30 AMP circuit
"tandem" type
E-22