Filter
Top Products
E-15
Selecting Energy Saving Mode
Temperature and Humidity Ranges
1
To select the Energy Saving mode, press the Energy Saver button on the remote
control or unit one or more times until the Energy Saver indicator lights up
.
Result:
The fan and compressor cycle on and off together.
The fan will continue to run for a short time after th
e
compressor cycles off
.
2 To stop the Energy Saving mode, press the Energy Saver button on the
remote control or unit again
.
Result: The fan runs at all times, while the compressor cycles on and off.
If you select the Good Sleep mode in the Energy Savin
g
mode, the Energy Saving will be cancelled and the air
conditioner will start up in the Good Sleep mode
.
If you wish to save Energy when using your air conditioner,
select
the Energy Saving mode with the Energy Saver button.
Mode IndoorTemperature OutdoorTemperature Indoor Humidity
Coolin
g 21°C to 32°C approx. 21°C to 43°C approx. 80% or less
The following table indicates the temperature and humidity ranges within which the
air
conditioner can be used in the best condition .
If the air conditioner is used at... Then...
Higher
temperatures
The
automatic protection feature may be triggered and the air
conditioner
stopped.
Lower
temperatures
A water leakage or some other malfunction may happen if the
heat
exchanger freezes.
Higher
humidity levels
Water
way condense on and drip from the surface of the unit if
it
is used for long periods.
Remote Control Control Panel
DB98-26004A.indd 15 2006-12-5 16:37:38