Adjusting the Air Flow Direction Horizontally
Press the Swing button on the remote control or unit.
Result
: The inner blades swing automatically left and right.
➢ In the Energy Saving mode, the blades may stop when the
compressor is off. For details on the Energy Saving mode, refer to
page 14.
To stop the blades moving left and right, press the Swing button again.
➢ To stop the blades in a specific position and orient the air flow in
the corresponding direction, simply press the Swing button when
the blades are in the desired position.
Depending on the position of the unit in your room, you can adjust
the orientation of the inner air flow blades on the right-hand side of
the unit, thus increasing the efficiency of the air conditioner.
1
2
Adjusting the Air Flow Direction Vertically
The outer air flow blades can be adjusted to control the vertical air
flow direction.
RECOMMENDATION
Adjust the air flow blades to the desired position, by pushing them upwards or
downwards.
➢
If you orient the air flow blades downwards and the unit operates in the Cool
mode for long periods of time, dew may:
◆ Form on the surface of the blades
◆ Drip from the blades
When... Adjust the blades to face...
Cooling Upwards.
Remote Control Control Panel
E-10