Filter
Top Products
E-
9
Airing Your Room
If you want to provide air circulation without cooling, you can use
the Fan mode.
If necessary, press the (On/Off) button.
Result: ◆ The air conditioner starts up in the Cool mode
.
◆ The unit beeps twice.
1
To set the fan speed:
◆
Press the , or button on the remote control as desired.
or
◆
Press the button on the unit one or more times until the
desired fan speed(F1, F2 or F3) is displayed.
3
To control the direction of the air flow, refer to page 11.
4
If the fan speed(F1, F2 or F3) is not displayed on the control panel:
◆ Press the button on the remote control
or
◆ Press the button on the unit one or more times until the fan speed
(F1, F2 or F3) is displayed.
Result:
◆ The unit beeps each time you press the / button.
◆ The air conditioner starts up in Fan mode.
➢
You can change modes at any time.
When the air conditioner is in the Fan mode, the temperature
cannot be set or displayed.
2
Mode
Cool/Dry/Fan
Fan Speed
Mode
Cool/Dry/Fan
Remote Control
Control Panel