Filter
Top Products
operating _13
operating your air conditioner
SELECTING OPERATION MODE
Air circulation
If the room is stuffy and stale, operate your air conditioner in Fan mode. The air conditioner will
reduce humidity without changing the inner temperature. We recommend using this mode during
especially humid but cool springdays.
1. Turn on the air conditioner.
Press the Power button on the remote control.
You will hear a short beep twice and your air
conditioner is properly on.
2. Set the operating mode.
Press the Fan button on the remote control to
select Fan mode.
icon will appear on the display.
3. Set the fan speed.
Press the Low/Med/High button on the remote
control.
One of the following icons will appear on the display.
Low fan speed is activated.
Medium fan speed is activated.
High fan speed is activated.
4. Open/block the vents.
Slide the lever towards icon to ventilate the room with
fresh air and icon to block.
• When you are using the remote control, make sure corresponding icon appears on the
display.
• Air flow can also be adjusted manually. (See page 15 for instructions.)