Filter
Top Products
Airing Your Room
E-9
ENGLISH
If the atmosphere in your room is stale, you can air it using the Fan
feature and if necessary, evacuate the stale air outside.
1
If you wish to evacuate stale air outside, push the ventilation lever on the front
of the unit to the right and the open position ( ).
Result:
The air inside the room circulates and stale air is evacuated outside.
Otherwise, push the ventilation lever to the left and the closed position ( ).
Result: The air simply circulates inside the room.
2
If necessary, press the (On/Off) button.
Result
: ◆ The operating mode indicator (COOL or FAN) on the
unit comes on.
◆ The air conditioner starts up in the mode selected
when the unit was last used.
◆ The unit beeps twice.
3
If the FAN indicator is not lit up on the unit:
◆ Press the button on the remote control
or
◆ Press the MODE button on the unit one or more times until the FAN
indicator lights up
Result: ◆ The unit beeps each time you press MODE.
◆ The air conditioner starts up in Fan mode.
➢
◆ You can change modes at any time.
◆ When the air conditioner is in Fan mode, the
temperature is not displayed; in this case, you do not
need to set the temperature.
4
To set the fan speed to...
Then...
Result
: Each time you press a button, the unit beeps.
5
To control the direction of the air flow, refer to page 10.
High ◆ Press the button on the remote control.
or
◆ Press the on the unit until the
indicator lights up
Med ◆ Press the button on the remote control.
or
◆ Press the on the unit until the
indicator lights up
Low ◆ Press the button on the remote control.
or
◆ Press the on the unit until the
indicator lights up
Remote Control
Control Panel