Filter
Top Products
E-
17
Solving Common Problems
Before contacting the after-sales service,perform the following simple checks.
Th
ey may save you the time and expense of an unnecessary service call.
Problem
The air conditioner does n
o
t
op
erate at all
Explanation/Soluti
o
n
The air conditioner does n
o
t
op
e
rate with the remote control
No beep is heard when
you press
(On/
O
ff) on the remote control
The air conditioner does not cool
The air f
low direction does not
change when
you press the
or on the unit button
The timer is not correctly triggered
Odour is p
ermeated in the
room d
uring air conditioning
Ch
eck that the circuit breaker used for the air conditioner has not
been
triggered.
Ch
eck that the power cable is plugged into a wall socket and the
socket is switched on, if necessary.
Ch
eck that the operating mode indicator (COOL or FAN) on the unit is
lit u
p; if necessary press (On/Off) button on the remote control or
uni
t.
Ch
eck that there are no obstacles between you and the unit.
Replace the remote control batt
e
ries if necessary.
Ch
eck that you are close enough to the unit (seven metres/yards
or less
).
Ch
e
ck that you are pointing the remote control at the remote
control sensor on the uni
t
.
Replace the remote control batt
e
ries if necessary.
Ch
e
ck that the correct operating mode has been selected COOL..
The room temp
e
rature may be too low.
Dust
m
ay be blocking the air filter; refer to page 16 for
cleaning ins
tructions.
Ch
eck that there is no obstacle blocking the air flow into or out of
the uni
t.
Ch
eck that the air conditioner has been switched on; if necessary,
pre
ss (On/Off) button on the remote control or unit.
Ch
eck that the timer has been programmed correctly;
see page
12~13.
Air the roo
m.
HSILGNE