Filter
Top Products
Installation (Cont.)
E-16
If you need to remove the front grille for replacement, follow the steps below.
Hold the air filter handle, pull it slightly forward, and then pull it out to the
right side.
1
Remove the screw below the control panel that holds the grille in place.
◆ Remove two knobs on the lower right hand section by pulling them forward.
2
NN
NN
oo
oo
tt
tt
ee
ee
Remove the shipping tape before pulling out the air filter, if necessary.
Disassemble the front grille.
3-1 Press both sides of the cabinet in the direction of the arrow as shown
in the figure.
3-2 Pull the lower part of the front grille slightly forward.
3-3 Grasp the grille at both sides near the bottom and carefully lift it straight
up to disengage the grille’s two top tabs from slots near the top of the
cabinet.
3
NN
NN
oo
oo
tt
tt
ee
ee
Do not pull bottom edge of grille toward you more than 3".
Damage to the grille’s two top tabs may occur.
Reinstall the front grille.
4-1 Fix the upper front grille.
4-2 Slide one side of the lower part of the front grille slightly backward.
4-3 Slide the other side backward.
4-4 Reinstall the screw, the air filter and the knobs.
4
3-1
3-3
3-1
3-2
Removal of the Front Grille