ARP-9009TL / 9011TL
7
C. Install the Window Slider Kit : Fig 3.
1. Open the window and place the Window Slider Kit on the inside edge of the window.
2. Adjust the Window Slider by adjusting it to the width of the window.
3. Close the window to secure.
4. Tighten the two screws to lock the window slider in place.
FUNCTION OF THE WATER TANK
This Portable Air Conditioner can run with or without water tank.
low, this tank will assist the unit in cooling effectively.
NOTE: This feature will not add humidity back into the room.
Step 1: Lift up and pull to remove the tank
Step 4: Place the tank back into place by lining up the tank
with the tab on the back of the air conditioner
Fig 3.