Filter
Top Products
8
SLEEP
By pressing the SLEEP button, the set temperature will increase 2°F / 1°C
in the first hour, another 2°F / 1°C in the second hour and then remains at that temperature.
WATER FULL
When the water tank is full the POWER/WATER FULL light will light up and you will hear a beeping noise. At this point
you must empty it out by placing a container underneath the drain port, remove the rubber drain plug and then water will
flow out until it is empty.
OSC (OSCILLATING) FEATURE
This feature allows the air to flow in all directions. Press the Oscillating button (OSC indicator will be lit). The air louvers
will begin oscillating. Press the OSC button again to turn it off.
REMOTE CONTROL
A - Timer button
B - Fan button
C - Mode button
D - Sleep button
E - Oscillating button
F - ON/OFF button
G - Temperature UP button
H - Temperature DOWN button