Filter
Top Products
4. Press SET.
5. Press or to change
MORN temperature.
6. Repeat Steps 2-5 for DAY, EVE, and NITE.
7. Repeat steps 2–6 above to program
any other day of the week.
8. Shift COOL-OFF-HEAT to
HEAT position.
9. Repeat steps 2-6 to program HEAT
(winter) settings.
Begin Programmed Operation
1. Place AUTO/ON
into AUTO.
2. Place COOL-OFF-HEAT
into COOL or HEAT
Depending upon the season.
3. Press PROG/MAN button
until indicator is in
PROG position.
7
>
>
PROG
MAN
SET PROG/MAN COOL-OFF-HEAT
AUX
AUTO - ON
>
>
SET PR
>
>
COOL-OFF-HEAT
PROG
MAN
SET PROG/MAN COOL-OFF-HEAT
AUX
AUTO - ON
>
>
AUTO - ON
COOL-OFF-HEAT
COOL-OFF-HEAT
SUMMER
WINTER
ET PROG/MAN C
PROG
MAN
PROG
MAN
SET PROG/MAN COOL-OFF-HEAT
AUX
AUTO - ON
>
>
NOTE: W
HILE IN THE
C
OOL MODE ONCE THE THERMOSTAT TURNS THE SYSTEM OFF
,
A BUILT
-
IN DELAY KEEPS THE
COMPRESSOR FROM TURNING ON FOR ABOUT
5
MINUTES
. T
HIS PROTECTS THE COMPRESSOR
. N
O ADDITIONAL TIME
DELAY RELAY
(
DELAY ON BREAK
)
IS NECESSARY
. T
O OVERRIDE THE
5-
MINUTE DELAY FOR INSTALLATION
,
PRESS
RESET. T
HIS WILL ERASE THE DELAY AS WELL AS ALL PROGRAMMING
.
110-737 3/11/04 8:15 AM Page 7