Filter
Top Products
– 22 –
INSTRUCT CUSTOMER ON USE OF HEATER
When you are satisfied that the appliance is
operating correctly, explain operation of heater to
the customer.
Fault-Failure Procedure
If unable to get the heater to operate correctly,
contact Rinnai directly or your Agent or Gas Utility.
Do not use electrical extension cords to connect unit
to power supply. Keep the power cord away from
the flue.
Some items are not covered under the unit’s
warranty. Example: annual maintenance, carbon on
flame rods/igniter, dust, spider webs, improper
conversions, etc.
8. If necessary, the unit can be levelled using the
adjustable legs under the front right and left hand
side legs.
6. Slide the insulation sleeve up to the flue
manifold,slip the securing clip over the sleeve as
shown.
7. Fix Back Spacer, Top to heater.
(3 screws in top back cover).
Up to
3/8"(10mm)
Adjustable Leg