Filter
Top Products
11
Cord Storage
When your Stor N Go Wet/Dry Vac is not in
use, it should be unplugged from the out-
let. Excess cord should be wrapped over
the hose storage rack. Several loops may
be required to eliminate any tripping haz-
ard created by a loosely hanging cord.
Removing Vac from Storage
Rack
1.Unplug the power cord from the electri-
cal outlet. Remove the cord from the
cord retainer. Drape the loose cord over
the top of the vac.
2.With your right hand, grasp the carry
handle.
3.With your left hand depress the release
tab located on the left side of the
storage rack.
4.Lift up on the handle, and pull the vac up
and out of the storage rack.
Cord Retainer
Cord
SP6625 5 gallon RIDGID 9/16/05 2:25 PM Page 11