Filter
Top Products
Cord, Hose & Accessory Storage
1. Your vac has convenient locations to
store your power cord, vac hose, and
accessories.
2. Under the left cover of your Wet/Dry Vac
(as shown) is a storage location meant
to hold your superflex hose, crevice tool
and power cord. For ease of storage,
the hose should be folded as shown and
placed in the storage bin to the far left.
You will also notice a rectangular feature
in the bottom of this bin. The crevice tool
will easily store standing up in this
feature, tapered side down. Additionally,
the power cord will also fit in this bin to
the far right side. Fold or wrap the cord
in approximately 1-foot lengths until you
get within a foot of the storage bin. The
folded cord should now fit neatly into the
storage bin.
3. Under the right cover of your Wet/Dry
Vac (as shown) is a storage location for
the dusting brush and utility nozzle.
Each of these nozzles has a specific
location molded into the housing. Only
these two nozzles should be stored in
this location. Also located inside this
compartment is the blowing port. Please
see the “Blowing” section for blowing
directions.
Hose
Storage
Crevice
Tool
Storage
Power Cord
Storage
Dusting
Brush
Storage
Utility
Nozzle
Storage
Blowing
Port
9
Correct
Hose
Wrap for
Storage
SP6609 8/25/05 2:02 PM Page 9