Filter
Top Products
7
Insert the flexible plastic end of the hose,
which is opposite the swivel end, into the
vacuum port directly above the drain.
Place the utility nozzle securely on the
swivel end of the hose and the vac is
ready for use.
NOTE: The swivel end of the hose for
your vac is removable if more hoses need
to be attached for more length from the
vac. To remove the swivel portion of the
hose, grasp the hose swivel and firmly pull
it out of the flexible hose. Connect the soft
end of a second hose (accessory #VT-
2507) where the swivel end of the original
hose was removed by forcing the sections
together until they fit tightly. You can also
connect two hoses together by purchasing
VT2500
(Hose to Hose connector).
To Store Your Accessories
1. Slide extension handles and accesso-
ries over the rings on the caster feet.
2. To remove handles and accessories,
lightly rotate and pull upward.
WD1200/30 RIDGID MANUAL (12001 3/16/01 4:23 PM Page 7