Filter
Top Products
22
Troubleshooting
Troubleshooting
Problem Possible cause Corrective action
Decrease in
suction strength
Dirt receptical / Bag
is full
Empty dirt receptical / change
bag (see page 17 to 19).
Dirt receptical is not
properly attached
Check clamps holding dirt
receptical, to make sure they
are tight and dirt receptical is
aligned.
Open vacuum inlet Close all vacuum inlets not in
use.
Exhaust line is
clogged
Verify that no object is blocking
the exhaust.
Blocked hose Plug the handle end of the
hose into the suction inlet, thus
reversing the suction in the
hose. Cover the gap around
the handle, to ensure suitable
suction strength, and ensure
contact with inlet contacts to
start the unit. This should clear
the hose.