Riccar R700 Vacuum Cleaner User Manual


 
10
Operation
Removing and reinstalling bottom plate
CAUTION: Disconnect the vacuum cleaner
from the electrical outlet before removing the
bottom plate.
1. Depress handle release pedal twice and place
the vacuum cleaner in the low position.
2. Turn vacuum cleaner over, exposing the
underside [Fig. 15].
3. Slide locking latch to the right [Fig. 16].
4. Press tabs inward on each side [Fig. 17] and
pull bottom plate off.
5. Reinstall by placing lower edge of bottom plate
along lower edge of nozzle [Fig. 18]. Snap
plate into place. Slide locking latch to the left to
secure.
Fig. 15
Fig. 16
Fig. 17
Fig. 18