Riccar R20P Vacuum Cleaner User Manual


 
14
MAIntenAnCe AnD CARe
Replacing the Vacuum Bag
NOTE: Unplug the vacuum cleaner from the
electrical outlet before changing the bag.
• Open the bag compartment by lifting
up the latch on the bag compartment cover.
• Remove the used vacuum bag by pulling
the red bag collar tab away from the
vacuum (Fig. 1). Slide the used bag out of
the holder which automatically seals the
bag (Fig 2). Discard the used bag.
• To install a new bag, slide the bottom of
the red bag collar into the bag holder until
it “snaps” into place (Fig. 3).
• Push the top of the bag collar upward until
the bag holder “snaps” into place on the
vacuum (Fig. 4).
• Tuck the bag corners into the bag
compartment before replacing the bag
compartment cover.
• Replace the bag compartment cover.
Fig. 1
Fig. 2
Fig. 3 Fig. 4