Filter
Top Products
9
MAIntenAnCe AnD CARe
MATERIAL
DRAWN
ISSUED
SCALE
FINISH
DATE
DATE
DO NOT SCALE
UNLESS OTHERWISE SPECIFIED
DESCRIPTION
DRAWING SIZE:D
PART NUMBER
SHEET 1 OF 1
X.X ±.02 IN RADII X.X ± .02
X.XX ±.01 IN X,XX ± .01
X.XXX ±.005 IN MACHINE SURFACE
X.XXXX ± .0005 IN BREAK SHARP CORNERS TO .010 MAX
± 0 °30" COMMON TO BE CONCETRIC TO .002
TACONY CORPORATION CLAIMS PROPRIETARY
RIGHTS IN THE MATERIAL DISCLOSED HERE IN.
THIS DRAWING IS ISSUED FOR ENGINEERING
INFORMATION ONLY. IT MAY NOT BE REPRO-
DUCED, NOR MAY THE INFORMATION HERE IN
BE USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM TACONY
CORPORATION.
1.000
TACONY CORPORATION
1760 Gilsinn Lane, Fenton, MO 63026
PART NUMBER
DESCRIPTION OF CHANGE
REV
PART NUMBER
SHEET
1 OF 1
A
B
C
D
1
2 3 4
5
6
7
8
A
B
C
D
1
2 3 4
5
6
7
8
Fig. 1
Fig. 2
Removing and Reinstalling the
Bottom Plate
WARNING! To Reduce the Risk of Electrical
Shock or Injury From Moving Parts, Unplug
Before Servicing or Cleaning.
To Remove the Bottom Plate:
• Press the handle release pedal to place the
vacuum cleaner in the flat position.
• Turn the vacuum cleaner over, exposing the
bottom plate.
• Turn the two screws a quarter turn to release the
bottom plate (Fig. 1). Remove the bottom plate.
• Reinstall the bottom plate by aligning the front
edge of the bottom plate into the notches inside
the nozzle housing (Fig. 2).
• Press the bottom plate into position until the
plate “clicks” on both sides. Tighten the two
screws a quarter turn to secure the bottom plate.