Filter
Top Products
RECOVERY CAPACITIES Recovery in U.S. Gallons/Hr. (GPH) and Liters/Hr. (LPH) at various temperature rises
MODEL INPUT (BTU/HR.) 40°F 50°F 60°F 70°F 80°F 90°F 100°F 110°F 120°F
NUMBER NATURAL & L.P. UNITS (22°C) (28°C) (33°C) (39°C) (45°C) (50°C) (56°C) (61°C) (67°C)
GPV75-75FV-2
75,000 GPH 173 138 115 99 86 77 69 63 58
LPH 654 523 436 374 327 291 262 238 218
GPV75-75PFV-2
70,000 GPH 161 129 107 92 81 72 64 59 54
LPH 610 489 407 349 305 272 244 222 203
Water heater(s) shall be model GPV75-75FV-2, manufactured by RHEEM-RUUD, having
gas input of 75,000 Btu/hr. and a recovery rate of 69 GPH at a 100°F temperature rise.
Water heater shall have a storage capacity of 75 gallons. Water heater shall have the CSA
seal of certification and be factory equipped with an AGA/ASME rated temperature and
pressure relief valve. Tank shall have a coating of high temperature porcelain enamel and
furnished with a magnesium anode rod rigidly supported. Water heater shall meet or
exceed the energy factor requirements of ASHRAE. Tank shall have a working pressure
rating of 150 psi, and shall be completely factory assembled, including a pressure
regulator properly adjusted for operation on ___________ gas. Water Heater shall have a
hot surface ignition system. Controls will be arranged for safety shutoff in event of pilot
failure. Complete unit shall be insulated with rigid polyurethane foam insulation. Water
Heater shall be covered by a three year limited warranty against tank leaks.
This product features a three year limited warranty against tank leaks.
Please refer to Commercial Warranty Information brochure
for complete warranty information.
MAXIMUM DELIVERY Delivery in U.S. Gallons and Liters. (Includes useable storage and recovery for indicated times)
MODEL CAPACITY INPUT (BTU/HR.) TEMP. 5 10 15 20 30 45 60 120 180 Min. to Rec.
NUMBER GALS LITERS NATURAL & L.P. RISE UNITS Min. Min. Min. Min. Min. Min. Min. Min. Min. Contents
GPV75-75FV-2
75 284 75,000 100 °F GAL 59 65 71 77 89 107 125 198 271 65
3
7.7 °C LTR 224 246 267 292 337 405 474 750 1027
GPV75-75FV-2
75 284 70,000 100 °F GAL 58 63 68 74 84 100 117 182 246 70
3
7.7 °C LTR 219 239 259 279 319 380 443 687 932
DIMENSIONAL INFORMATION All dimensions in English and Metric units
MODEL APPROX. SHIP.
NUMBER UNITS AB C D E FG
WEIGHT
GPV75-75(P)FV-2
inches 72 60-1/8 26-1/4 14-3/4 11 53-1/4 1 330 Lbs
mm 1829 1527 667 375 279 1353 25 150 Kg
HOT
WATER
CONNECTION
COLD
WATER
CONNECTION
POWER VENT
ASSEMBLY
C
B
F
A
D
G
G
E
T&P FITTING
3/4" N.P. T.
SIDETAPS
1/2"
ANODE ROD
Recommended Specifications:
Maximum and Minimum Vent Lengths:
Rheem Water Heating • 101 Bell Road, Montgomery, Alabama 36117-4305 • www.rheem.com
Rheem Canada Ltd./Ltée • 128 Barton Street West, Hamilton, Ontario L8N 3P3
PRINTED IN U.S.A 11/07 WP FORM NO. RR102C-4 Rev.14
In keeping with its policy of continuous progress and product improvement, Rheem-Ruud reserves the right to make changes without notice .
PowerVent Gas continued.
Limited Warranty:
HIGH ALTITUDE (2,000-7,700 FT.): 3" VENT
NUMBER OF MINIMUM MAXIMUM
90° ELBOWS NUMBER PIPE PIPE
WITH VENT OF 45° LENGTH LENGTH
TERMINAL ELBOWS REQ. (FT.) (FT.)
One (1) None – 34.0
One (1) One (1) 5.0 31.0
Two (2) None – 28.0
Two (2) One (1) – 25.0
Three (3) None – 22.0
SEA LEVEL TO HIGH ALTITUDE (0-7,700 FT.): 4" VENT*
NUMBER OF MINIMUM MAXIMUM
90° ELBOWS NUMBER PIPE PIPE
WITH VENT OF 45° LENGTH LENGTH
TERMINAL ELBOWS REQ. (FT.) (FT.)
One (1) None – 95.0
One (1) One (1) 5.00 92.5
Two (2) None – 90.0
Two (2) One (1) – 87.5
Three (3) None – 85.0
Three (3) One (1) – 82.5
For the 3" and 4"
vent, one 90°
elbow is approxi-
mately equal to
5 feet of pipe.
One 45° elbow is
approximately
equal to
2.5 feet of pipe.