Filter
Top Products
1. From your
HOME screen,
turn until
the HUMIDITY
LEVEL screen is
displayed in blue.
2. Press
. The
selection is
highlighted in
orange.
3. Turn
until
the humidity level
that you require is
displayed.
4. Press
to
confirm your
choice.
Adjusting humidity level
Ranging from OFF to 6, you can adjust the humidity level at any time to find the setting that is most
comfortable for you. To adjust your level of humidity:
Warming the H5i
The warm-up feature is used to pre-heat the water before starting treatment.
To start warming:
1. Navigate to the humidity level icon.
2. Push and hold for three seconds. The Warming Up status bar is
displayed.
You can stop warm-up at any time by pressing for at least three
seconds. You can start treatment at any time by pressing .
Note: In order to assist the heater plate in cooling, your S9 device will
continue to blow air for up to an hour after treatment has stopped. However,
you can unplug the device from the power outlet at any time and allow the
heater plate to cool without air flow.
5
English