Filter
Top Products
7
SAVE THESE INSTRUCTIONS IN A SAFE
PLACE FOR FUTURE REFERENCE
PARTS
A. Main body
B. Handle
C. Steam Release Button
D. Power Cord
E. Upper cord Clip
F. Lower cord clip
G. On/Off Button
H. On Indicator Light (Blue)
I. Steam Ready Indicator Light (Green)
J. Floor Brush
K. Floor Head
L. Floor brush Release Pedal
M. Clean Water Tank
N. Microfiber Pad (x2)
O. Carpet Glide
P. Anti-scale Cartridge
THE FOLLOwINg INFORmATION IS PROVIdEd FOR SERVICE by A qUALIFIEd
ELECTRICIAN ONLy:
Rated voltage: 110~120V, 60HZ, 1500W
This appliance must be grounded. Use only the proper type outlet when plugging
in the appliance, do not attemt to override the ground wire feature.
ASSEmbLy
Remove all components from the packaging.
1. Insert the handle into the cleaner main body until it locks into position. [2]
2. Assemble the main body of the cleaner to the floor Brush. [3]
3. Assemble the cleaner with floor brush to the floor head. [4]
USE
BEFORE YOU BEGIN CLEANING
1. Remove the clean water tank up and out from the cleaner main body. [5]
2. Twist the cap counter clockwise and remove. [6]