Filter
Top Products
2 U37 Regency ULTIMATE Rear Vent Direct Vent Freestanding Gas Heater
To the New Owner:
Congratulations! You are the owner of a state-of-the-art ULTIMATE Rear Vent Direct Vent Gas Stove by FPI Fireplace
Products International. The Regency Gas Series of hand crafted appliances has been designed to provide you with all the
warmth and charm of a woodstove, at the flick of a switch. The models U37-NG, and U37-LP of this series has been approved
by Warnock Hersey for both safety and efficiency. As it also bears our own mark, it promises to provide you with economy,
comfort and security for many trouble free years to follow. Please take a moment now to acquaint yourself with these
instructions and the many features of your ULTIMATE Rear Vent Direct Vent Freestanding Gas Stove.
INFORMATION FOR MOBILE/MANUFACTURED HOMES AFTER FIRST SALE
This Regency product has been tested and listed by Warnock Hersey as a Direct Vent Wall Furnace to the following standards: ANSI Z21.88b-
2003/CSA 2.33b-2003, and CAN/CGA-2.17-M91.
This Direct Vent System Appliance must be installed in accordance with the manufacturer's installation instructions and the Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part 3280, or the current Standard of Fire Safety Criteria for Manufactured Home Installations,
Sites, and Communities ANSI/NFPA 501A, and with CAN/CSA Z240-MH Mobile Home Standard in Canada.
This appliance installation must comply with the manufacturer's installation instructions and local codes, if any. In the absence of local codes follow
the current National Fuel Gas Code, ANSI Z223.1 and the current National Electrical Code ANSI/NFPA 70 in the U.S.A., and the current CAN/CGA
B149 Gas Installation Code and the current Canadian Electrical Code CSA C22.1 in Canada.
REGENCY
ULTIMATE Rear Vent Direct Vent
Freestanding Gas Stove
This Regency Mobile/Manufactured Home Listed appli-
ance comes factory equipped with a means to secure the
unit.
This Regency Mobile/Manufactured Home listed appliance
comes equipped with a dedicated #8 ground lug to which an
8 gauge copper wire from the steel chassis ground must be
attached.