Raypak RHP 33 Heat Pump User Manual


 
POWER SUPPLY
•Verify that all circuit breakers are reset and working properly.
•If the
Power
lamp on the control panel still does not light, contact the installing dealer,
since it may be a power problem requiring an electrician.
WATER FLOW
•Verify that the filter is clean to provide good flow.
•Verify that the valves are properly positioned.
•If the
Water Flow
lamp on the control panel still does not light, and water is circulating
in the pool or spa, contact the installing dealer to adjust the valves.
TIME CLOCK ADJUSTMENT
Verify that the time clock is set to permit the heater to run long enough to heat properly.
9