3
START UP
Refer to the Start Up procedure outlined in the
Lectra/San MC Manual. The following instructions
are supplementary to those instructions.
Note: If utilizing a VacuFlush toilet see Application
Note (L286).
1. Check plumbing and electrical connections.
2. Turn on water supply.
3. Check for leaks.
4. Fill tank with solar salt.
No adjustments are necessary with this system.
Float Valve
Assembly
(31-312)
Fig. #5 Four Gallon Salt Feed System with Pump Exploded Parts
Tank with Lid
(31-311)
Salt Feed Pump
32-300 (12 VDC)
33-300 (24 VDC)
Mounting Adapter
(31-315)
Inlet Filter Screen
(31-322)
O- Ring
(1203B3)
O-Ring
(1203B3)
Overflow Grommet
(31-317)
Elbow
(31-318)
Outlet
Grommet
(31-316)
Overflow Hose
(Not Supplied)
Check Valve
(31-326)
Tubing
(31-319)
Tank Lid Adapter
(31-325)
Salt Feed Pump
(32-300 12V
33-300 24V)
Salt Feed
Lectra/San MC
Circuit Board
Black
Red
U15
U14
Fig. #4 Wiring Diagram for Four Gallon Salt Feed
System with Pump
VacuFlush
®
is a registered trademark of Sealand Technology, Inc.
Install here
Heat Sink (#EHST0220)
on the transistor (Q7)