Filter
Top Products
10
© 2011 Directed Electronics. All rights reserved.
Runtime Reset
Press and release
If more time is needed while remote start is active, runtime reset will
reset the runtime counter to the pre-programmed setting. The green
ghost LED’s show the runtime and the remote start On tones play to
comfirm runtime reset.
Note
Remote Start must be On to use this feature.
AUX 1
Press and release
AUX
Activates (or if On, deactivates) the Aux 1 output. The AUX LED turns
on and tones play to confirm.
Temperature Request
Press and hold the button
Requests the vehicle’s interior temperature and displays it by illuminat-
ing the green ghost LED’s; cold is 1 LED, cool (2), warm (3), warmer
(4)
* The optional Horn Honk feature must be connected.
Advanced Commands: (Level 2)
Press and release the button 2 times. The transmit LED illuminates in
sets of double flashes to indicate Level 2.