Procom ML300HGA Gas Heater User Manual


 
17
SPECIFICATIONS
Btu(available)
Gas Type
Ignition
Pressure Regulator Setting
Inlet Gas Pressure* (inches of water)
Maximum
Minimum
Dimensions, Inches (HxWxD)
Heater
Carton
Weight (pounds)
Heater
Shipping
ML300HGA
15,000/28,000
Propane/LP Only
Piezo
8
" W.C.
14"
11"
23 1/2
×
26 5/8
×
8
26 1/2
×
28 1/2
×
91/4
26
31
ML300TGA
14,000/28,000
Propane/LP Only
Piezo
8
"W.C
14"
11"
23 1/2
×
26 5/8
×
8
26 1/2
×
28 1/2
×
91/4
26
31
Note: Dimensions listed are outer most points on the heater (includes control knobs and grill).
* For purposes of input adjustment.
REPLACEMENT PARTS
Note: Use only original replacement
parts. This will protect your warranty
coverage for parts replaced under
warranty.
PARTS UNDER WARRANTY
Contact authorized dealer from
whom you purchased this product.
If they are unable to supply original
replacement part(s), call the number
on this back of the manual. When
contacting your dealer or PRO-COM,
have ready:
your name
your address
model and serial numbers of
your heater
how heater was malfunctioning
type of gas used (propane/LP or
natural gas)
purchase date
Warranty Card
Usually, we will ask you to return the
defective part to the factory.
TECHNICAL SERVICE
You may have further questions
about installation, operation, or
troubleshooting. If so, contact
PRO-COM. The information on the
back of this manual.
ACCESSORIES
Purchase these heater accessories
from your local dealer. If they can
not supply these accessories,
contact PRO-COM for information.
You can also write to the address
listed on the back page of this
manual.
EQUIPMENT SHUTOFF VALVE
For all models. Equipment shutoff
valve with 1/8
" NPT tap. This part
is not currently available from
PRO-COM.
For all models, provides better heat
distribution. Makes heater or efficient.
Complete installation and operating
instructions included.
Thermostatically-controlled PF06-
YJLF-B, includes three settings
ON/OFF/AUTO
FAN PF06-YJLF-B
PARTS NOT UNDER
WARRANTY
Contact authorized dealers of this
product. If they can’t supply original
replacement part(s),contact PRO-COM.