Procom ML300HBA Electric Heater User Manual


 
17
SPECIFICATIONS
Note: Dimensions listed are outer most points on the heater (includes control knobs and grill).
* For purposes of input adjustment.
REPLACEMENT PARTS
Note: Use only original replacement
parts. This will protect your warranty
coverage for parts replaced under
warranty.
PARTS UNDER WARRANTY
Contact authorized dealer from
whom you purchased this product.
If they are unable to supply original
replacement part(s), call the
number on the front of this manual .
When contacting your dealer or
PRO-COM, have ready:
your name
your address
model and serial numbers of
your heater
how heater was malfunctioning
type of gas used (propane/LP or
natural gas)
purchase date
warranty card
Usually, we will ask you to return the
defective part to the factory.
PARTS NOT UNDER
WARRANTY
Contact authorized dealers of
this product. If they can’t supply
original replacement part(s), contact
PRO-COM’S phone number (877)
886-5989.
TECHNICAL SERVICE
You may have further questions
about installation, operation, or
troubleshooting. If so, contact
PRO-COM’S phone number (877)
886-5989.
ACCESSORIES
Purchase these heater accesso-
ries from your local dealer. If they
can not supply these accessories,
contact PRO-COM for information.
You can also write to the address
listed on the front of this manual.
EQUIPMENT SHUTOFF VALVE
For all models. Equipment shutoff
valve with 1/8" NPT tap.
Btu(available)
Gas Type
Ignition
Pressure Regulator setting
Inlet Gas Pressure *(inches of water)
Maximum
Minimum
Dimensions, Inches (HxWxD)
Heater
Carton
Weight (pounds)
Heater
Shipping
ML200HBA
10,500/20,000
Propane/LP Only
Piezo
8" W.C.
14"
11"
23 1/2
×
19 1/4
×
8
26 1/2
×
21 3/4
×
9 1/4
21
25
ML200TBA
9,000/20,000
Propane/LP Only
Piezo
8" W.C.
14"
11"
23 1/2
×
19 1/4
×
8
26 1/2
×
21 3/4
×
9 1/4
23
27
ML300HBA
15,000/28,000
Propane/LP Only
Piezo
8" W.C.
14"
11"
23 1/2
×
26 5/8
×
8
26 1/2
×
28 1/2
×
9 1/4
26
31
ML300TBA
14,000/28,000
Propane/LP Only
Piezo
8" W.C.
14"
11"
23 1/2
×
26 5/8
×
8
26 1/2
×
28 1/2
×
9 1/4
28
33
FAN PF06-YJLF-B
FLOOR MOUNTING STAND
For locating heater on the floor,
away from a wall. Complete installa-
tion instructions provided with floor
mounting stand.
Optional FAN Kit
The optional fan kit, part PF06-YJLF-B
fits all models noted in this manual.
The fan has 3 settings ON/OFF/Auto.
The thermostatically controlled PF06-
YJLF-B improves heater efficiency and
includes installation and operating
instructions.