Filter
Top Products
This User's Guide is designed to help you gain the best
performance from your BISSELL
®
DigiPro
®
Vacuum Cleaner.
Inside you will find assembly and operating instructions, safety
precautions, maintenance and troubleshooting instructions.
Please read through this Guide thoroughly before assembling
and using your vacuum cleaner. Refer to the Product View to
locate and familiarize yourself with its parts and features. This
will be helpful in assembling the unit and in finding the proper
location of parts when you perform routine maintenance.
Additional diagrams are included in the maintenance and
troubleshooting sections to simplify those tasks.
The DigiPro is packaged for convenience and can be assembled
without the need for tools.
The top of the Extension Wand is the rounded section.
Place one hand on the Extension Wand Release, the
black plastic grip just below the top of the Extension
Wand. Hold the top part of the Extension Wand with one
hand and pull down on the Extension Wand Release until
the Wand is fully extended.
The bottom of the Extension Wand features a rounded
back and a flat front, with two plug holes visible on the
underside. Align the flat side with the power prongs in
the Powerfoot base. Slide the Wand onto the Powerfoot
base. It should click into place. Lift the unit slightly to
make sure the connection is secure.
The Handle features a rounded back and a flat front, with
two plug holes visible on the underside. Align the flat side
with the power prongs in the Extension Wand. Slide the
Handle onto the Extension Wand. It should click into place.
Lift the unit slightly to make sure the connection is secure.
Slide open the Hose Connection Door on the canister
unit. Align the arrow on the top of the Hose Connector
with the arrow on the inside of the suction unit. Press
down to secure.
How To Use This Guide
1.
2.
3.
4.
5
WARNING:
Do not plug in your DigiPro
®
until
you have completely assembled
it according to the following
instructions and have become
familiar with all instructions
and operating procedures.
Top
Assembly
Hose
Connection
Door