Filter
Top Products
7
FOREWORD
Porter-Cable Model 7812/7814 Wet/Dry Vacuum delivers 99.85% filtration
efficiency which is great for fine particulate pick-up, like drywall or surface
dust. These units come equipped with a powerful 9 amp motor, built in
outlet for use with power tools providing automatic vacuum start-up when
tool is turned on and a 6 - 10 second vacuum overrun to clear hose when
tool is turned off, dual filtration system, corrosion resistant tank, large wheels
for easy maneuvering and a convenient flat top surface tray for holding tools
while working.
UNPACKING
Carefully remove the Vacuum Cleaner from the carton. Retain all packing
materials until you have inspected and satisfactorily operated the Vacuum
Cleaner.
Do not connect the appliance to the power source until
you read and understand this entire instruction manual.
Release the two container locks (A) Fig. 1, (one on each side of Vacuum
Cleaner), by pulling outward on the bottom of each lock.
Lift the Motor Unit from the container and carefully set aside.
Remove the wheels and accessories from the container.
ASSEMBLY TOOLS REQUIRED - Adjustable Wrench, Rubber Mallet.
ASSEMBLY TIME ESTIMATE - 30 minutes or less.
DISCONNECT APPLIANCE FROM POWER SOURCE.
NOTE: For Model 7814, begin with instruction #5.
1. Invert the container on a solid, flat surface (like a workbench or floor).
2. Install the two Steering Rollers (A) Fig. 2 into the holes provided in the
bottom of the container. Seat firmly.
3. Insert the wand rest, (B) Fig. 2 into its position and seat firmly.
4. The wheel and axle assembly consists of two wheels on an axle. Place
this assembly in the slot provided in the bottom of the container, and
press into place. Seat firmly. (See Figure 2)
FUNCTIONAL DESCRIPTION
ASSEMBLY
Fig. 1
A
Fig. 2
B
A