Planar VISTA-10SE Home Security System User Manual


 
–17–
ARMING PERIMETER ONLY
WITH ENTRY DELAY OFF
Using the
7 INSTANT Key
BEFORE ARMING,
close all doors and windows
(see
CHECKING
FOR
OPEN
ZONES
on page 13)
THE INSTANT MODE
ARMS THE PERIMETER
(INCLUDING THE
ENTRY/EXIT DOOR), WITH
NO ENTRY DELAY.
PERSONS WITHIN THE
PREMISES CAN MOVE
ABOUT FREELY
Use this key when staying inside and do not expect anyone to use an entry/exit door.
1. Enter your security code and press the INSTANT key.
2. The keypad beeps three times and displays the armed message. The red ARMED
indicator lights. Note that there is an
exit
delay in effect before arming actually takes
place. See the note below.
3. After arming, an alarm sounds immediately if any protected perimeter door or window
is opened, but you may otherwise move freely throughout the premises.
An alarm sounds immediately if anyone opens an entry/exit door.
If you wish to open the entry/exit door to let someone in after arming INSTANT, you can
re-start the
exit
delay at any time – simply press the [] key, and then let that person
in. This will avoid having to disarm the system and then re-arm it again.
Note: When you first arm the system in the INSTANT mode, “You may exit now” will be
displayed on the second line of an Alpha keypad during the programmed exit
delay.
This delay is in effect in the system even when arming INSTANT.
When the
exit delay period ends, the system is fully armed in the INSTANT mode.
TYPICAL DISPLAYS – “ARMED INSTANT”
STAY
INSTANT
AC
ARMED
*
INSTANT
*
YOU MAY EXIT NOW
FIXED-WORD > ALPHA
The message “you may exit now
disappears when the exit delay expires.