Filter
Top Products
________________________________________________________________
V1.0
20 / 21
Document 020-1156-00 Rev B
003: Standard
Monitor ID
5 3D 001 ~ 098
Image retention
5 47 000: OFF
001: ON
Auto adjustment
5 AA 000: OFF
001: ON
DDC/CI
5 AB 000: OFF
001: ON
Reset User Default
5 AC
OSD Info Box
5 5B 000: OFF
001: ON
Store User Default
5 AD
Factory Reset
5 7E
Power
5 21 000: STBY
001: ON
Key Pad
5 41 000 : POWER
001 : SOURCE
002 : MENU
003 : UP
004 : DOWN
005 : LEFT
006 : RIGHT
007 : MUTE
Remote Control
42 000: Disable
001: Enable
002: Pass
through
Key Pad function
5 43 000: Disable
001: Enable
Menu Key function
5 45 000: Disable
001: Enable
Power Key
function
5 46 000: Disable
001: Enable
4.2 Remote Control Pass-through mode
When PC sets the LCD monitor to Remote Control Pass through mode, the LCD shall send a three bytes
packet (followed by “CR”) in response to RCU button activation. Note, that in this mode the RCU shall
have no effect on the monitor function. For example: “+Volume” will not change the volume in the
LCD but only sends “+Volume” code to PC over the RS232 port.
Remote Control pass-through packet format from LCD monitor to PC(ASCII)
Name Length RCU-Code1
RCU-Code2 CR
Byte Count
3 MSB LSB 00D
Bytes order
1 2 3 4
Example: Remote Control pass-through when “Menu” key is pressed (2E)
Name Length RCU-Code1
RCU-Code2 CR
Byte Count
3 2 E 00D