Pioneer PRO1130HD Carbon Monoxide Alarm User Manual


 
VERSATILE VIDEO AND AUDIO CONNECTIVITY
Inputs:
- Antenna F connections x 2 (1-Digital & Analog / 1-Analog)
- HDMI with HDCP x 2
- Component x 3 (2 on rear / 1 on front)
- AV Composite x 3 (2 on rear / 1 on front)
- S-Video x 3 (2 on rear / 1 on front)
- i.LINK x 2 (for use with DVHS)
- D-Sub for PC x 1 (front)
- SR In x1
- CableCARD
TM
Interface (rear)
Outputs:
- Optical audio output x 1
- Subwoofer output x 1
- Monitor output x 1 (composite)
- SR+ output x 1
SOUND TECHNOLOGY
13 watt stereo amplifier with separate bass and treble controls x 2
2-Way Stereo Speakers
SRS
®
/ FOCUS
TM
/ Tru-Bass Surround Sound Audio Processing
for a virtual sound TV Experience
OTHER
Table Top Stand (supplied)
3-Meter Digital Connection Cable (supplied)
Wall Bracket, Tilt Wall Bracket (optional)
10-Meter Digital Connection Cable (optional)
30-Meter Fiber Optic Connection Cable (optional)
PRO–1130HD 50” HIGH DEFINITION PLASMA TELEVISION
PRODUCT DIMENSIONS
Display (W x H x D): 48.2” x 28.2” x 3.6”
Display weight: 70.1 lbs.
Media receiver (W x H x D): 16 9/16” x 3 9/16” x 11 13/16”
Media receiver weight: 9.9 lbs.
CARTON DIMENSIONS
W x H x D: 61.5” x 46.5” x 21.5”
Weight: 169 lbs.
UPC
012563011935
Specifications and design subject to modification without notice.
High-Definition Television (HDTV): HDTV refers to a complete
product/system with the following minimum performance attributes:
- Receiver: Receives ATSC terrestrial digital transmissions and decodes
all ATSCTable 3 video formats.
- Display Scanning Format: Has active vertical scanning lines of 720
progressive (720p), 1,080 interlaced (1,080i) or higher.
- Aspect Ratio: Capable of displaying a 16:9 image.
- Audio: Receives and reproduces, and/or outputs Dolby Digital audio
(Consumer Electronics Association, August 2000).
Displaying the same still images for long periods should be avoided as image
shadowing or burn-in may occur.
Plasma Display Systems display images consisting of hundreds of thousands
of minute pixels (light emitting cells), and there is a possibility that some
pixels may be inactive, flashing or continually illuminated.
Plasma Display Systems are made of glass; be sure to secure it from damage
from impact.
Plasma Display Systems, while in use, may generate some functional sounds,
for example: fan motor noise, and electrical circuit humming/glass panel
buzzing. The Plasma Display System Media Receiver uses an on-board
cooling fan. If the ambient temperature of the Media Receiver becomes high,
the speed of the cooling fan increases and it may sound louder than normal
during the cooling period.
Plasma Display Systems emit slight amounts of IR (Infrared Emission) through
luminous discharge technology. This IR is not harmful to living organisms, but may
interfere with the operation of remote controls for other equipment, or cause static in
equipment using IR (such as cordless headphones or cordless microphones).
PIONEER, the Pioneer Logo, the Elite logo and PureVision are registered trademarks
of Pioneer Corporation.
CableCARD™ is a trademark of Cable Television Laboratories, Inc.
*DOLBY and the double-D symbol are registered trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
i.LINK and the i.LINK logo are trademarks of Sony Corporation.
SRS WOW, SRS and the symbol are trademarks of SRS Labs, Inc.
SRS, TruBass and FOCUS are trademarks of SRS Labs, Inc.
In the United States, TV Guide and other related marks are registered marks of
Gemstar-TV Guide International, Inc. and/or one of its affiliates.
ISF is a trademark of Imaging Science Foundation, Inc.
All phosphor-based display systems (CRT Television Systems - both direct
view and projection televisions - as well as plasma display systems) may
possibly have image retention, also known as burn-in. Recommended
guidelines are as follows:
- Do not display still images for long periods (such as fixed images from
PC or TV game equipment, and/or time of day indicator or channel
logo display).
- Do not display content in the 4:3 aspect ratio (black or gray bars on left
and right side of content) or letter-box content (black bars above and
below of content) for extended periods of time, or use either of these
viewing modes repeatedly within a short period of time. This Plasma
Display System is equipped with multiple wide-screen viewing modes;
use one of these screen modes to fill the entire screen with content.
- Displaying dark images after displaying still images for a period of
time may cause image retention. In most cases, the image retention can
be corrected by displaying bright images for a similar period of time.
However, if your Plasma Display System displays still images for
additional long periods of time, image retention may be irreparable.
Plasma Display Systems may have a negative effect on sound or images
coming from AM radios, PCs or video-related products.