Filter
Top Products
11
En
English
Assembling the Stand
Assembly Procedure
1
Turn the base cover over so the underside is
facing up.
2
Insert the stand pipes into the base cover.
• Insert stand pipe (R) into the side marked "R" and
stand pipe (L) into the side marked "L".
• Ensure that the open sides of the stand pipes face
inward. Insert the stand pipes, making sure to match
them to the raised portion of the base cover.
3
Tighten the screws
➀
(4 mm × 10 mm: silver)
to stabilize the stand pipes.
�
�
•
Assemble the stand with a soft sheet placed under the base
cover. If a sheet is not laid before assembly, the front surface
of the base cover may be scratched.
•
Please take care when installing stand pipes (L) and (R) to
ensure that they are in the correct positions. Mistakenly
installing the stand pipes may damage the stand.
4
After assembling the stand, attach the falling
prevention metal fittings with the installation
screws
➄
(M4 × 35 mm: black).
�
Be sure not to attach the falling prevention metal fittings in the
reverse position.