Filter
Top Products
KUBIK 1.0 SL110A
Page 3 of 4 Bare Lamp Flush Unit
1-28W T5 Linear
Job Information Type:
Lightolier www.lightolier.com
We reserve the right to change details of design, materials and finish.
SL110A.pdf
Canlyte www.canlyte.com
Cat. No. Finish Power Feed Cable Kit
SL003NLG
SL003NWH
Textured Light Grey
White
Mounts to a 3" (76mm) or 4" (102mm) octogonal outlet box.
Kit includes one 0.024" (0.6mm) thick, 5" (127mm) round steel
canopy, one 0.05" (1.3mm) thick grounded crossbar threaded
stud, one 0.046" (1.2mm), 96" (2438mm) long aircraft galvanized
cable with zinc plated hanger adjusting glider hardware,
two white plastic cable stay and one 18 AWG (AWM), 10 feet
(3048mm) long white cord, 10 Amps max.
Cat. No. Finish Extension Blank (4')
SL003F4 Brushed Aluminum Permits power feed between two 1" x 1" (25mm x 25mm)
brushed and anodized units in a straight run with supplied
extra wires 18 AWG, 10 Amps max, and wire connectors
to energize them. Includes one 46-3/16" (1173mm) long
extruded aluminum channel and cover, two solid aluminum
multi-function blocks as a wireway, plug inserts and wire
connectors.
46-3/16"
Cat. No. Finish Invisible Coupler
SL003G Zinc plated Invisible coupler for joining two Kubik 1.0 units together
mechanically or/and electrically. Recommended for direct
surface mounting. Comes with 4 wires 18 AWG, 10 Amps max.
Cat. No. Finish 5 Face Connector
SL003H Brushed Aluminum Kubik 1.0 units coupled with exclusive solid brushed and
anodized aluminum 5-face connectors and power feed can
satisfy virtually any layout requirement. The connector permits
you to create square, rectangular, continuous rows, L, T,
X configurations. Includes four threaded couples, plug insert
(3), four wires 18 AWG and wire connectors, 10 Amps max.
Kubik 1.0
1"
Cat. No. Finish Cable Mounting Kit (non-electrical)
SL004NLG
SL004NWH
Textured Light Grey
White
Mounts to a 3" (76mm) or 4" (10mm) octagonal outlet box.
Kit includes one 0.024" (0.6mm) thick, 5" (127mm) round steel
canopy, one 0.05" (1 3mm) thick grounded crossbar, threaded
stud, one 0.046" (1.2mm), 96' (2438mm) long galvanized
aircraft galvanized cable with zinc plated hanger and
adjusting glider hardware. Can be used with either Cable
or Stem Power Feed Kit.
Lightolier is a Philips group brand