Filter
Top Products
Features
Flush Unit : 2" overall height, meets ADA requirements.
Channel : 1" x 1" brushed and anodized extruded aluminum ballast channel.
Provided with KO’s and threaded holes to accept all mounting accessories.
Cover : brushed and anodized aluminum ballast cover. Press-fit installation.
No visible hardware.
Multi-fonction bloc (2) : retains lampholder to the ballast channel. Also
functions as a wireway for continuous rows and patterns. Brushed and anodized
aluminum finish.
Lampholder Housing (2) : 1" square brushed and anodized aluminum with turret
style locking socket.
Mounting
Direct Mount: square canopies or invisible feed suitable for plaster ceiling,
exposed ceiling or T-Bar ceilings mounts. See details on page 2.
Suspended Mount: single stem or aircraft cable with round canopy suitable for
mounting on a standard outlet box for plaster ceiling, exposed installation or T-Bar
ceilings mounts. Stem and cable mounts can both be used on the same fixture.
Wall Mount : can be wall mounted vertically or horizontally.
Labels
cULus Certified. Suitable for damp locations.
Electrical
Ballast: Electronic rapid start extra slim profile 1 lamp 28W T5 linear ballast. Not
available in universal voltage.
120V: 0.25 amps
277V: 0.11 amps
Lampholder: G5 plug-on base, miniature Bi-pin.
Finish
Natural brushed and anodized aluminum. All suspension parts and Spiral louver
painted with powder coat paint process.
KUBIK 1.0 SL110A
Page 1 of 4 Bare Lamp Flush Unit
1-28W T5 Linear
Dimensions
Lightolier www.lightolier.com
We reserve the right to change details of design, materials and finish.
SL110A.pdf
Canlyte www.canlyte.com
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
46-3/16"
1"
2"
Ordering guide (complete luminaire consist of unit & power feed)
Cat. No. Lamp Volts Description Finish
SL110A28IA1 120V
4 ft Bare Lamp Flush unit Brushed and Anodized Aluminum
SL110A28IA2
1 -28W T 5
277V
Lightolier is a Philips group brand