ENGLISH
– 11 –
TIMER RESERVATION
■ ON Timer and OFF Timer are available.
1
OFF TIME setting
● Select the OFF TIME by pressing the (OFF)
Button.
● Setting time will change according to the below
sequence when you press the button.
● The value change quicker if you keep pressing the
button.
OFF Timer Reservation
■ Operation stop at setting time
2
Press the (Reserve) button
● OFF TIMER reserved with a signal received sound
“beep”.
● The (OFF) Mark starts lighting instead of blinking.
0.5 1.0 1.5 9.5 10 11 12
0.5 hour interval 1 hour interval
1
ON TIME setting
● Select the ON TIMER by pressing the (ON)
Button.
● At the beginning of setting, time 6 hours was set.
● Setting time will change according to the below
sequence.
● The value change quicker if you keep pressing the
button.
ON Timer Reservation
0.5 1.0 1.5 9.5 10 11 12
0.5 hour interval 1 hour interval
1
Press the (Cancel) button
● As the time settings are stored in remote controller
memory, you only have to press the (Reserve)
button in order to use the same setting next time.
CANCELLATION of Timer Reservation
2
Press the (Reserve) button
● ON TIMER reserved with a signal received sound
“beep”.
● The (ON) Mark starts lighting instead of blinking.
o
■ Operation will start for setting
temperature at setting time (The starting
time may different depend on the room
temperature and set temperature).