Philips LED Luminaires Indoor Furnishings User Manual


 
10 11
LED LUMINAIRES CITY BEAUTIFICATION
LED LUMINAIRES CITY BEAUTIFICATION
Product dimensions
Measurements in mm
The Philips LedString system is formed by LED
modules, connected by wires and designed to be
directly mounted onto a sign back-plate or other
substrate. The driver is a single device which
converts the main voltage to a low voltage
DC
required to operate LedString.
Features
Available in 21mm reels of
LEDs, with a slim
driver: both fully weather proof
Each driver has a minimum connection of 5
LEDs
(Red and Amber) or 7
LEDs (Blue and Green).
Maximum connection is 45
LEDs or
49
LEDs respectively
Standard range: Red, Amber, Blue, Green and White
Safety compliance:
EN 60598
LedString
LedMaster 800
Controller
The LedMaster 800
is a compact and powerful
controller in the Philips
LED range of color
changing luminaires. LedMaster 800 possesses
tremendous controlling power to command up to
720 units of the
LED color changing luminaires.
Product dimensions
Features
Optimizes power supply for
R, G, B diodes of
the
LED luminaires thereby providing constant
power for dynamic color changing ranges of
each color
An embedded data repeater allows
LED
luminaires to be installed over long distances.
This is especially beneficial to motion-picture-
like programming
With 7 power output ports, the system can
support up to 7 circuits of
LED luminaires with
a maximum power limit of 100W x 3
Measurements in mm
Power Supply
The LedMaster 800 Power Supply is an integrated
device panel and serves as a power source for
the Philips
LED range of color changing luminaires.
It also serves as the data repeater hub of
its controller.
LED module
Connector
Driver
Pitch=7mm
Controller Power Supply
101
194
182
101
CONSOLE
Program Selection
0.T1.T2.T3.T
4.T
TESTFAILACTIVEPOWER
OFF
ON
POWER
96
286
62
62
264
285
Ingress protection: IP 66 (EN 60598, EN 60529)
Approval marks: ENEC, CE, cCSAus.
Quality standard:
ISO 9001-2000
Environmental standard: ISO 4001
Benefits
Reliable and flexible
Low cost of ownership
Long life
Safe to use: no high voltages or toxic materials
Easy to install
No breakage during shipping and handling
Main applications
Outdoor signage
Decorative lighting
Features
Extremely diverse color changing effects – up to
32 sequencing effects in descriptive language with
minimum memory storage
Connects up to 8 sub-controllers for a maximum
of 720 units of true-color
LED luminaires
Built-in 64K non-volatile memory to store up to
32 sets of programs
Equipped with 5 sets of
DIP switches that allows
manual settings of 32 pre-set programs
RS-232 port – serves as an interface between
LedMaster 800 and
PC software; or as a gateway
to other control systems
Main applications
Façade
• Landscapes