Filter
Top Products
5 You can also place the charging base on a level and horizontal
surface (fig. 4).
6 Slide the brush tool onto the crevice tool and place them in the
charging base (fig. 5).
7 FC6094 only: insert the telescopic stick and the floor nozzle into
the nozzle & stick holder ('click') (fig. 6).
Charging the appliance
Charge the appliance for at least 18 hours before you use it for the first
time.
When the charging light starts blinking during operation, the battery
pack is running low and needs to be recharged.
1 Insert the small plug into the charging base and insert the adapter
into the wall socket (fig. 7).
◗ The charging light will go on to indicate that the appliance is
charging (fig. 8).
B
The charging light will stay on as long as the appliance is placed on the
charging base and the adapter is in the wall socket.
B
The charging light does not give any information about the charge level
of the built-in battery pack.
Using the appliance
1 Push the on/off slide forwards to switch the appliance on (fig. 9).
2 Push the on/off slide backwards to switch the appliance off
(fig. 10).
3 Leave the adapter in the wall socket and always put the vacuum
cleaner back onto the charging base after use, even if the battery
pack is still almost fully charged.
ENGLISH8