Philips AC4055 Air Cleaner User Manual


  Open as PDF
of 116
 
2 SlidetheESPparticlelterintotheappliance(Fig.6).
3 Slidethepre-lterintotheappliance.(Fig.20)
4 Toreattachthefrontpanel,insertthebottomedgerst(1)andthenpressthetoppart
home(2)(Fig.7).
Guarantee and service
If you need information or if you have a problem, please visit the Philips website at www.philips.com
or contact the Philips Consumer Care Centre in your country (you nd its phone number in the
worldwide guarantee leaet). If there is no Consumer Care Centre in your country, go to your local
Philips dealer.
Environment
Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an ofcial collection point for recycling. By doing this, you help to preserve the
environment (Fig. 21).
Troubleshooting
This chapter summarises the most common problems you could encounter with the appliance. If
you are unable to solve the problem with the information below, contact the Consumer Care
Centre in your country.
Problem Solution
The selected function/
time mode doesn’t
work.
The appliance may be in standby mode or may be switched off.
The appliance doesn’t
work.
There may be a connection problem. Check if the plug is inserted in
the wall socket properly.
The appliance may not be switched on. AC4065/AC4055: press the
function selection button. AC4063/AC4053: press the on/off button.
The ESP particle lter or the front panel may not be placed properly.
Reinsert the lters and reattach the front panel.
The zeolite gas lter is not placed yet. Insert the lter and reattach the
front panel.
If you have performed the above checks and the appliance still does not
work, it may be malfunctioning. Unplug the appliance and take it to your
Philips dealer or an authorised Philips service centre.
The clean air doesn’t
come smoothly out of
the air outlet
The pre-lter may be clogged. Clean the pre-lter (see chapter
‘Cleaning and maintenance’).
Perhaps you forgot to remove the plastic wrapper of a new lter.
Remove the plastic wrapper before you switch on the appliance again.
The air inlet or outlet may be blocked by external objects. Remove the
object that blocks the air inlet or outlet.
-
ENGLISH 11
 previous next