Filter
Top Products
EPG (Electronic Programme Guide) (Continued)
EN
33
2. Press the green colour key on the remote control to
watch/listen to the selected programme currently on air.
3. Press the red colour key to mark/unmark a reminder on
the selected programme. You can set up to a maximum of
10 reminders.
> The TV will wake up automatically or display a message
when the programme is about to start. Follow the
instructions on screen to watch the programme.
4. Press the yellow colour key to jump to the
Next or the
Previous day or back to Today.
5. Press the
MENU/BROWSE key, while Programme Guide is
active, to activate the Programme Guide main menu.
° Use the cursor up/down to highlight and select a menu
item.
-
What's on allows you to browse through the
programme guide information of your preferred EPG
channels.
-
Search by genre allows you to search for the
programmes according to a selected genre.
-
Scheduled reminders allows you to view and change the
reminders you have set.
- Preferred EPG channels are the channels from which
the EPG data is currently being acquired.This menu
allows you to mark/unmark ( up to 50) preferred EPG
channels.
-
Acquire EPG data allows you to update the information
for the preferred programme guide channels. Follow the
instructions on screen.
6. To quit the Electronic Programme Guide, press the a key
again.
Tips:
- the EPG screen will not include TV channels which are
not in the Preferred channel list or which are uninstalled
(See Rearrange menu).
- new added channels ( via reinstallation or installation)
will have to be marked in the preferred EPG channel list
before you can see EPG data.
Note: the reminder(s) will wake up your TV from standby
only if you switched off your TV with the
B
key on your
remote control.
Note: after the installation of your channels, by default 40
channels with available EPG data will automatically be
marked as preferred EPG channel.
Note: Acquisition of EPG data is done automatically while
watching TV.
a
a
Downloaded From TV-Manual.com Manuals