Petsafe PDT00-12892 Pet Care Product User Manual


 
www.petsafe.net 15
The “Come” Command
1. Put a separate, non-metallic collar on your pet’s
neck ABOVE the Receiver Collar, and attach a
long leash. Note: Be sure the extra collar does
not put pressure on the Contact Points.
2. Hold your leash in one hand and the
Handheld Transmitter in the other.
3. Wait for your pet to walk away from you.
4. To start with Vibration, press and hold the
Top Button (light blue), while saying “Come”
and if necessary use the leash to guide your
pet toward you.
5. Immediately release the button as soon as
your pet steps toward you, and praise him
enthusiastically.
6. Quickly move backwards as your pet begins
to come toward you, praising him the entire
time. Stop moving backwards and praise
your pet when he returns to you.
7. Repeat steps 3 to 6 several times.
8. If your pet comes to you reliably on receiving
the spoken “Come” command, then training
is complete. Release your pet and praise
him. If not, move on to Step 9.
9. Wait for your pet to walk away from you. Using the
Recognition Level for your pet, press and hold the Middle
Button (medium blue on the PDT00-12894 model) to deliver
quick Vibration followed by controlled Static Stimulation, or
the Bottom Button (dark blue on the PDT00-12894 model)
to deliver a quick on/off Static Stimulation followed by
controlled Static Stimulation, while saying “Come” and if
necessary use the leash to guide your pet toward you.
10. Immediately release the button as soon as your pet steps
toward you, and praise him enthusiastically. Note: If a Static
Stimulation button is held up to 12 continuous seconds,
the LED will flash rapidly to indicate a safety time-out. Once
released, the button resets to normal functionality.
11. Quickly move backwards as your pet begins to come toward
you, praising him the entire time. Stop moving backwards
and praise your pet when he returns to you.
12. Repeat steps 9 to 11 several times.
13. If your pet now comes to you reliably with the spoken
“Come” command, he may now be ready to respond without
Static Stimulation. Take a play break and then go back and
repeat from Step 3 with Vibration only.