Filter
Top Products
4 www.petsafe.net
The modes cycle from 1 to 5. Pushing the Mode Button while the Receiver Collar is on Mode 5
will cause the Receiver Collar to revert to Mode 1. Refer to the Function and Response Table to
choose the Mode that best fits your pet.
The Receiver Collar is equipped to automatically increase the level of Static Correction the longer
your pet remains in the Static Correction Zone if the collar is set at Mode 2 or above.
The Receiver Indicator Light acts as a low battery indicator, flashing every 4 to 5 seconds when
battery replacement is required.
Mode 1
• When your dog reaches the warning zone, the collar will emit a warning tone.
• If he continues to the correction zone or lingers in the warning zone for 2 seconds,
the collar will emit a simultaneous correction tone and vibration.
Mode 2
• When your dog reaches the warning zone, the collar will emit a warning tone, then correction
tone and vibration.
• If he continues to the correction zone or lingers in the warning zone for 2 seconds,
the collar will emit a correction tone and a level 1 static correction.
• If the dog stays in the area he will receive progressively stronger static corrections
up to Level 2.
Mode 3
• When your dog reaches the warning zone, the collar will emit a warning tone.
• If he continues to the correction zone or lingers in the warning zone for 2 seconds,
the collar will emit a correction tone and a level 1 static correction.
• If the dog stays in the correction zone, he will receive progressively stronger static corrections
up to Level 5.
Mode 4
• When your dog reaches the warning zone, the collar will emit a warning tone.
• If he continues to the correction zone or lingers in the warning zone for 2 seconds,
the collar will emit a correction tone and a level 5 static correction.
Mode 5
• When your dog reaches the warning zone, the collar will emit a warning tone.
• If he continues to the correction zone or lingers in the warning zone for 2 seconds,
the collar will emit a correction tone.