Part Number: 80WX0101©2012 Pella Corporation
WINDOW REPLACEMENT INSTRUCTIONS FOR CASEMENT,
DOUBLE-HUNG AND CLAD FRAME WINDOWS INTO EXISTING
DOUBLE-HUNG FRAME USING FRAME SCREWS
EXTERIOR
Flashing Tape
Sill Adapter
Always read the Pella® Limited Warranty before purchasing or installing Pella products.
By installing this product, you are acknowledging that this Limited Warranty is part of the terms of
the sale. Failure to comply with all Pella installation and maintenance instructions may void your
Pella product warranty. See Limited Warranty for complete details at http://warranty.pella.com.
These instructions were tested and developed for replacing windows in wood-frame wall
construction systems designed to manage moisture. This method of installation involves
removing the sash only of the existing window. The original window frame will remain
in place and only the existing sash, exterior stops and frame hardware must be removed.
Installation recommendations for other types of wall construction, wall systems or conditions may
be obtained from Pella Corporation or a local Pella retailer. Building designs, construction methods,
building materials, and site conditions unique to your project may require an installation method
different from these instructions and additional care on your part. Determining the appropriate
installation method is the responsibility of you, your architect, or other construction professional.
REMEMBER TO USE APPROPRIATE
PERSONAL PROTECTIVE EQUIPMENT
CAUTION: Many windows in older
homes are painted with lead-based
paint. Removal of old windows may
disturb this paint. Proper precautions
must be taken to minimize exposure to
dust and debris. Consult state or local
authorities for more information.
YOU WILL NEED TO SUPPLY:
•CedarorImperviousshims/spacers(12to20)
•Closedcellfoambackerrod/sealantbacker
(12to30ft.)
•Pella®SmartFlash™foilbackedbutylwindow
and door flashing tape or equivalent
•PellaWindowandDoorInstallationSealantor
equivalent high quality, multi-purpose sealant
(1tubeperwindow)
•Lowexpansion,lowpressurepolyurethane
insulating window and door foam sealant - DO
NOTusehighpressureorlatexfoams
•#8x3-1/4"Finishheadscrews
(6to10perwindow)
•Pellareplacementwindowsilladapter
TOOLS REQUIRED:
•Tapemeasure
•Level
•Sealantgun
•Prybar
•Utilityknife
•Puttyknife
•Hammer
•Screwdrivers(Flat&Phillips)
•Adjustablepliers
•SideCuts
•Roto-tool,reciprocatingsaw
•Woodchisel
•1/8"drillbit
•Drill
Installation will require two or
more persons for safety reasons.
SEALANT
SEALANT