Filter
Top Products
4 C1616M-A (1/08)
Installation
PACKAGE CONTENTS
WM5001-4U
1 Wall bracket
1 Module sleeve with cover plate
WM5001-4UEXP
1 Module sleeve
MOUNTING A WALL BRACKET
You can mount a wall bracket onto a wall so that the modules can be inserted into the sleeves from the right, left, top, or bottom.
NOTE: The back of the wall bracket has four rubber feet for placing the mount on a desk. The feet do not need to be removed if the mount is
installed on a wall.
To mount a wall bracket, follow these steps and refer to Figure 1.
1. Position the bracket on the wall in your desired orientation.
2. Drill four holes into the wall.
3. Secure the wall bracket to the wall using four 8-32 screws with washers (not supplied).
Figure 1. Wall Bracket Mounting