Filter
Top Products
6 PELCO Manual C428M-B (2/98)
QTY SYMBOL DESCRIPTION PART NUMBER
2 C1, C2 CAPACITOR, 15 MFD, 100V CAPU0015.0/100N
1M1PAN MOTOR 2508001
2M2TILT MOTOR PS78001
1J2CONNECTOR CONMAB6100
14 — CONNECTOR PINS CON66102-7
4 S1-S4 SWITCH SWI1SM1
1—INPUT CONNECTOR CON206044-1
1—MATING CONNECTOR ASSY CONA14S
1—ACTUATOR SWIJS138B
1—LENS MATING CONNECTOR CONMAS6100
Figure 1. PT280-24P Wiring Schematic
Cable distances should not exceed the distances specified in Section 3.1. The fol-
lowing are some recommended common installation practices.
1. Always use jacketed stranded multi-conductor interconnecting cable between
the control and the pan/tilt, with additional conductors than needed for future
servicing and/or additions.
2. Always use color-coded conductors for ease of wiring and to identify functions
at a later date.
3. Keep a wiring diagram with the system for later use and reference.