Filter
Top Products
C342SM-A (5/06) 3
Important Safety Instructions
1. Installation and servicing should be done only by qualified service personnel and conform to all local codes.
2. The weight of the camera/lens and enclosure must not exceed 40 lb (18.14 kg) with 12 VDC pan and tilts or 52 lb (23.59 kg) with 24 VAC or
120 VAC pan and tilts.
3. Only use replacement parts Pelco recommends.
4. After replacing/repairing the unit’s electrical components, conduct a resistance measurement between line and exposed parts to verify the
exposed parts have not been connected to line circuitry.
5. Installation methods and materials should be capable of supporting four times the combined weight of the enclosure, pan and tilt, camera,
and lens.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit.
This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.
To reduce the risk of electrical shock, do not remove cover. No user-serviceable parts
inside. Refer servicing to qualified service personnel.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.