Filter
Top Products
Pelco Manual C342SM (12/98) 3
Please thoroughly familiarize yourself with the information
in this manual prior to installation and operation.
1.0 GENERAL
1.1 IMPORTANT SAFEGUARDS AND WARNINGS
Observe the following WARNINGS before installing and using this product.
1. Installation and servicing should be done by qualified service personnel only,
and should conform to all local codes.
2. The weight of the camera/lens and enclosure must not exceed 40 lb (18.14 kg)
with 12 VDC pan and tilts or 52 lb (23.59 kg) with 24 VAC or 120 VAC pan and
tilts.
3. Only use replacement parts Pelco recommends.
4. After replacing/repairing this unit’s electrical components, conduct a resistance
measurement between line and exposed parts to verify the exposed parts
have not been connected to line circuitry.
5. Installation methods and materials should be capable of supporting four times
the combined weight of the enclosure, pan and tilt, camera, and lens.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage constituting a
risk of electric shock is present within this unit.
This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this
unit.
CAUTION:
RISK OF
ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.