Filter
Top Products
Pelco Manual C545M-E (2/02) 7
Power Cord: Unit is supplied with grounded power cord (either U. S. Standard
or Continental European Standard)
Output Connector: AMP CPC type, 14 pin (mate supplied)
Cable Requirements: 4 conductors for PS7/PS30 models and 6 for PS20/PS20-24 models
Operating Distances: The following are the recommended cable distances between the
control and the listed scanners. The PS20 and PS20-24 are pow-
ered locally and do not use power from the controller.
20 AWG 18 AWG 16 AWG
(0.5 mm
2
) (1.0 mm
2
) (1.5 mm
2
)
PS7-24
745 ft 1185 ft 1885 ft
(227 m) (361 m) (575 m)
PS30A
2265 ft 3605 ft 5720 ft
(690 m) (1098 m) (1743 m)
PS30-24
115 ft 185 ft 295 ft
(35 m) (56 m) (90 m)
PS20
2,300 ft 3,700 ft 5,900 ft
(701 m) (1,127 m) (1,798 m)
PS20-24
5,600 ft 9,000 ft 14,300 ft
(1,706 m) (2,743 m) (4,368 m)
NOTE: A relay box can be used to extend the maximum operating
distance (control to relay box) to 13,000 feet using 16 AWG.
GENERAL
Construction
Cover: Steel, black polyester powder coat
Chassis: Steel, zinc plated
Panel: Aluminum, black polyester powder coat with white silkscreen
Unit Size: 5.50 (W) x 1.75 (H) x 8.90 (D) inches (13.97 x 4.45 x 22.61 cm)
Refer to Figure 2.
Unit Weight
MPS5DT: 3 lb (1.36 kg)
MPS524DT: 4 lb (1.80 kg)
MPS524DT/220: 4 lb (1.80 kg)
(Design and specifications are subject to change without notice.)
Figure 2. Dimension Drawing